PVC Injection molded heel lifts
The injection-molded PVC vinyl heel lifts are designed for heavy use, such as in work shoes, boots, walking shoes, or even sandals. They are extremely durable.
The tough low-cost PVC heel lifts are injection-molded, rather than poured in an open-top mold. This produces a much more precise heel lift; one with no bubble defects or voids.
Injection molding allows us to reduce the weight of the lift. The 12mm lifts have cavities on the underside to reduce weight.
The durable plastic lifts will gradually conform to the shape of your shoe, are easily trimmed to fit, with scissors or a sharp knife. They are most comfortable and stable if placed under the footbed or insole of the shoe or boot. This allows both feet to rest on the same material.
Molded lifts will outlast a pair of shoes and be ready for the next pair. If you use our tape to hold them in place, they can easily be removed and installed into the next new pair of shoes or work boots.
These molded plastic lifts are designed to be semi-permanently attached in a pair of shoes, using glue or double-sided tape.
Available in narrow or large, man or woman, in 3, 5, 7,9 and 12mm thickness. Comes in packs of 6 units.
